2-Component Sealing Compound On Polysulphide Basis

Hydraflex 300 is a solvent-free sparyable and scrap able two-component sealing and leak-proof material on the vasis of polysulphides. The hardened substance provides a non-rigid and highly elastic sealing, which avoids damage due to extensile stress on the joint borders in case of movement.
Hydraflex 300 in non-ageing, resistant to atmospheric in fluence, water proofing, resistant to oil and fuel as well as to UV-radiation. Hydraflex300 serves as a sealing material for expansion and construction joints in the field of civil engineering and bridge construction. Adheres very well to concrete, plaster, bricks, netural stone, asbestos cement, glassm ceramic, iron, aluminium, non-ferrous metal, V2 A-steel,......
  • elongation : 25%
  • Color : Grey
  • Setting Time : 1.30 Hr.
  • Density : 1.5 Kg./L
  • Stroage and Shelf Life
    Hydraflex 300 must be stored in air tight contrainers. Keep away from heat and from naked flames.
    Polyflex 035
    Excellent Adhesion Polyurethane Primer

    Polyflex 035 is a sprayable one component ready to use polyurethane resin. It has excellent adhesion properties and strong rigid coating nature as well as favorable weather ability. It is especially used as primer for mortar concrete or cement concrete. It is used as a topcoat in floor materials. Polyflex 035 is a seamless floor coating material with very high elasticly for use in schools, stairways, offices, dining halls, shops, gymnasium, training rooms. It has excellent abrasion and water resisting properties.


  • Easy to apply with brush.
  • Easy to repair.
  • Very good adhesion to all kinds of substrates.
  • Fast-drying
  • Excellent weather resistance, water and
    chemical hardness.
  • High elasticity
  • Seamless floor coating prevents dust penetration.
  • Good anti-abrasion property.
  • Easy maintenance of floor.
  • Instrction in Use
  • Clean substrate by removing laitance, oil, grease and dust. Cracks should be repaired with Hydratop.
  • Polyflex 035 should be thoroughly stirred, preferably with a mechanical device, to ensure a homogeneous mixing.
  • Polyflex 035 is to be coated evenly with brus, rolloer(spongge)or special spray equipment in 2 coats. Consumption is about 100 gm/m2 per coat. Second overlapping coat shall be spplied After first coat is tack free. Depending on conditions, Polyflex 035 will have cured completely within approx. 1 day of application. Protect from rain for approx 20 minute
  • Clean tools with Xylene before adhered material hardened.
  • Cleaning
    The working equipment, tools etc. can be mechanically cleaned by using by using brushes in combination with Xylene. The cleaning should be done immediately after the completion of the work and within the pot life of the material to avoid sediments on the equipments, tool etc.
    In unopened packs, Polyflex 035 has a shelf life of at least 12 months when stored in warehouse conditions below 35C. It should, however not be stored at very low temperatures, to guarantee a good work consistency
    Hydraflex Board
    Fiber Expansion Concrete Joint Filler

     Hydraflex board is an expansion joint asphlt by a special patented process to assure longevity. Wherever cost-effective joint filler is required, Hydraflex board meets the need, hydraflex board is versatile, resilient, flexible and non-extruding. When compressed to half of its original thickness, it will recover to a minimum of 70% of its original thickness. Hydraflex board will not deform, twist or break with normal on-the-job handing.
    Typical Uses
    The surface must be clean, dry and free from oil, form release agent and any foreign matter such as dust, dirt, etc. Be sure all voids, cracks and rod holes are repaired with fabric membrane. This material will not span large cracks. Any repairs must be made fore application. Hydraflex Board is posittioned against the forms, at interrupting objects or columns, and against abutting structures prior to the placement of concrete. The expansion joint should be installed 1/2" below the concrete surfacr. Thinner joint of 1/4", 3/8" and 1/2" spaced at frequent intervals offer greator control than thicker joints spaced at greater intervals.
    Introduction in use

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player

    The information contained herein is believed to be reliable to the best of our knowledge. However, all recommendations are made without gurantee of performance and with warranty of freedom from legal responsibility including patentliability on the part of Civil Master Co.,Ltd.
    1/4", 3/8", 1/2", 3/4", 1"
    Versatile, resilient, flexible and non-extruding and offers a minimium of 70% recovery after compression Unaffected by temperature extremes Lightweight, easy to use and available in sizes and shapes fabricated to most requirement.
    Adseal Acryl 702 is a one-component water based acrylic sealant which cures quickly in contact with air and humidity to make a permanent flexible seal with high adhesion performance on different materials even porous substrates without primer. It is environmental friendly before and after curing with good weather and UV stability.
    Abseal ACRYL 702 is specifically formulated for gaps and joints where expansion and contraction cause rigid filler to crack or fall out. This product is particularly suitable for use as painter and decorator caulking compound.
    Sealant Gun Type